top of page

Swing Gate Installation is no more a Tedious Task

Choosing a gate is itself a challenge and installing that is another tedious job. It may take several days but you can ease it by educating yourself on how to do it or you may hire a professional who can do it minutely. Installing the underground electric motor for the gate is a real challenge. Anyhow, the gate installation is easier when the underground job is done. You must look if there are any underground lines passing through and then check if you have the necessary skills to tackle the complexities. Read the safety and installation instructions before you begin anything regarding swing gate installation.

Thorough guide for Swing Gate Installation You must immediately get an advice from experts, if you are not able to understand the installation process. For installing the motors, you will get a guide and read everything carefully for swing gate installation. Contact the manufacturer to clarify if there are any difficulties. The guide will help you with the installation of the underground gate motor for gates. Before diving into details, cross verify if the weight of the proposed gates is correct and limited.

Precautions before installing the Swing Gates

  1. If there is less friction, then opening and closing of the gates must be taken care of.

  2. The gate should be well-balanced

  3. If it is stopped in half position, then it should not tend to move again

  4. The gate must close and open without any disruptive noises.

  5. The gate must slide through smoothly

  6. When you install the gate, ensure that the mounting area is compatible with all the dimensions of underground.

  7. The gate should provide a closing strike

  8. It is an added advantage if it provides an opening strike as well.

Steps during the Installation of Gate These are a few steps which you must take care before the installation of swing gate. During installation what are the things that you must take care of? When the installation of foundation box happens, you should allow 100mm around the box and underneath the box. Make sure that the heel of the casing is fully packed, and the gate should fit on it abruptly. Few modern motors are now having low voltage D.C which is safe to use and easy to install. The first step in swing gate installation will be to sort out if you can do the installation yourself or you need a professional. The next step is to finish the underground work completely. Further steps include the building of a strong concrete which suits the weight of the gate. The next step is to attach the gates on the appropriate places.

Stay mindful while attaching the Gates Before attaching the gates, make sure that the gate pivot point is properly greased. When you are hanging the gate ensure that the levels are proper, and welding is on track. Have an eye on welding because once it’s done, it’s very difficult to change the gates. As these are electronic gates which will have a circuit board, make holes and fix the board on gates.

Powering up the Control Card The control card must be powered up and ensure that you have the correct low voltage that’s required for the electronic gates. It’s not only about installation, the automation should work well throughout the year, so check it appropriately. Now, you may have an idea about swing gate installation. When you take care of all these steps, swing gate installation becomes easy for you. You just need to carry out these steps without any flaws and you are good to go. If you are still doubtful about the installation, then just hire a professional who will do it within 6-8 hours with finesse.

bottom of page